MAPH600S Series
6 Inlet 6 Outlet Fuild/Gas + 0~96 Circuits
MAPH600S slip rings
  • MAPH600S series is 6 passages liquid rotating union(hydraulic rotary joints) which can get fuild/gas from stationary part to rotating part when 360°continually rotating
  • Could connect with M5、G1/8、G1/4、G3/8、G1/2 channel ,also can combine with power wire,signal wire,Ethernet, USB, industrial-BUS, control line, solenoid valve, sense line,etc. It’s standard flange installation, hollow shaft can be customized as well.
    Media Types: Fuild,Air/Gas,Vacuum,Chemical,DI/Tap Water,Oil,etc.
Standard series PART# Explanation

Product Quality Level Table
Products Level CodeMax speedWorking LifeSealing Element
VC100RPM10Million Revs.Common Seals
VD300RPM30Million Revs.High-Quality Seals

Rotary Union SpecificationsMechanical data
Passage6 in 6 outWorking LifeSee Prod Quality Level
Max.10MPa,Vacuum 0.01torrRotating SpeedSee Prod Quality Level
TorqueConsult technician about detailsWorking Temp.-30℃~80℃
Electrical dataOperating Humidity0~85% RH
ParameterValueContact MaterialPrecious Metal
PowerSignalHousing MaterialAluminium Alloy
Rated Voltage0~240VAC/VDC0~240VAC/VDCProtection gradeIP51
Insulation Res≥1000MΩ/500VDC≥1000MΩ/500VDC
Lead WiresAWG28#TeflonAWG28#Teflon
Lead LengthStandard 300mm
Dielectric Strength500VAC@50Hz,60s
Res Noise<0.01Ω

MAPH600S-01 (6 passages M5)

MAPH600S-02 (6 passages G1/8")

MAPH600S-03 (6 passages G1/4")

MAPH600S-XX series
1)XX=01,Connection size=M5, Pipe size3~6mm
2)XX=02,Connection size=G1/8,Pipe size3~10mm
3)XX=03,Connection size=G1/4,Pipe size3~12mm
MAPH600S-XX-S066 in 6 out0619
MAPH600S-XX-S126 in 6 out01226
MAPH600S-XX-S186 in 6 out01833
MAPH600S-XX-S246 in 6 out02443.6
MAPH600S-XX-S366 in 6 out03657.3
MAPH600S-XX-S566 in 6 out05685.7

10A and Signal(5A) can be combined in any way as you need,Max.Ring:96 rings,Can be customized based on standard slip rings,Please contact us.

More product references in the same series:
Request 3D Model(*.STEP) Files

In our 3D database, over 20000 3D -Models are available, due to protection of commercial confidentiality,
Please write your company name and email.

3D Model files will be sent to your emails automatically in 5 minutes.


Our experts are here for you!