MFO108 Series
1 Channel Fiber Optic + 1~48 Circuits Power/Signal
MFO108 slip rings
  • MFO108 series is hybrid slip rings, It can combine 1 channel optic fiber with electrical 1~48 circuits power/signal(2A),
  • Hybrid FORJs combine an electrical slip ring with a fiber optic rotary joint, allowing electrical, power and optical signal transfer through a single rotational joint. While fiber optics are becoming the medium of choice for signals due to large bandwidth, immunity to EMI and high reliability, it is acknowledged that rotary interfaces must also carry electrical power.
Standard series PART# Explanation

Specification
ItemsType
Single-modeMultiple-mode
WaveWidth(nm)±50
Max insert Loss,23℃(dB)1.20.7
Insert Loss Ripple(dB)0.60.4
Return Loss(dB)≥55(No connector)≥40(No connector)
Max Power(W)0.5
Weight(g)50
Max spped(rpm)1000
Working Life>500 million revs
Working Temp.(℃)-45~85
Storage Temperature(℃)-50~85

Mechanical dataElectrical data
ParameterValueParameterValue
Working Life20Million Revs.PowerSignal
Rotating Speed250RPMRated Voltage0~440VAC/VDC0~440VAC/VDC
Working Temp.-30℃~80℃Insulation Res≥1000MΩ/500VDC≥1000MΩ/500VDC
Operating Humidity0~85% RHLead WiresAWG16#TeflonAWG22#Teflon
Contact MaterialGold-GoldLead LengthStandard 300mm
Housing MaterialAluminium AlloyDielectric Strength500VAC@50Hz,60s
Torque0.1N.m;+0.03/6ringRes Noise<0.01Ω
Protection gradeIP51





MFO108 series parts# list
Part#Optic Fiber Channel10ASignal/5ALength(mm)
MFO108-S0610638
MFO108-P061016038
MFO108-S12101254.8
MFO108-P1210112054.8
MFO108-P0610-S0616654.8
MFO108-S18101871.6
MFO108-P1810118071.6
MFO108-S24102488.4
MFO108-P1210-S121121288.4
MFO108-P0610-S18161888.4
MFO108-S301030105.2
MFO108-S361030105.2
MFO108-S421030105.2
MFO108-S481030105.2

Circuit numbers and high current can be customized, please contact customer service for more models

QUESTIONS?

Our experts are here for you!

CONTACT US

Request 3D Model(*.STEP) Files
X

In our 3D database, over 20000 3D-models are available, due to protection of commercial confidentiality,Pls write your company and email as below,

3D model files will be sent to your emails automatically in 5 minutes.